Meiho University Institutional Repository:Item 987654321/1123
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 2872/3785 (76%)
造访人次 : 3423807      在线人数 : 385
RC Version 6.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻
    主页 ‧ 登入 ‧ 上传 ‧ 说明 ‧ 关于MUIR ‧ 管理 到手机版


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.meiho.edu.tw/ir/handle/987654321/1123


    题名: Experimental matching method for the two-dimensional numerical simulation of micro-floating zone in laser heated pedestal
    作者: P. Y. Chen;C. L. Chang;S. L. Huang;C. W. Lan
    贡献者: Department of Gemology, Meiho University, Pingtung 91202, Taiwan;Institute of Photonic & Optoelectronics, National Taiwan University, Taipei 10617, Taiwan;Department of Electrical Engineering, National Taiwan University, Taipei 10617, Taiwan;Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan
    关键词: experimental matching method;interface shape;laser-heated pedestal growth;YAG;single-crystal fiber;heat transfer;fluid flow
    日期: 2010
    上传时间: 2011-09-22T05:07:32Z (UTC)
    摘要: It has been verified by comparing with the shape of the molten zone in terms of the experiment and then analyze the simulation results. That is experimental
    matching method.
    The two-dimensional simulation was employed to study the melt/air and melt/solid interface shapes of the miniature molten zone formed in the laser-heated pedestal growth (LHPG) system. Using non-orthogonal body-fitting grid system with control-volume finite difference method, the interface shape can be determined
    both efficiently and accurately. During stable growth, the dependence of the molten-zone length and shape on the heating CO2 laser is examined in detail under both the maximum and the minimum allowed powers with various growth speeds.
    Finally, heat transfer and fluid flow in the LHPG system are analyzed near the deformed interfaces. The global thermal distributions of the crystal fiber, the melt,
    and the source rod are described by temperature and its axial gradient within length of ~10 mm. As compared with the growth of bulk crystal of several centimeters in
    dimension, natural convection drops six orders in magnitude due to smaller melt volume; therefore, conduction rather than convection determines the temperature distribution in the molten zone. Moreover, thermocapillary convection rather than mass-transfer convection becomes dominant. The symmetry and mass flow rate of double eddy pattern are significantly influenced by the molten-zone shape due to the diameter reduction and the large surface-tension-temperature coefficient in the order of 10-4~10-3. According to the analysis shown as above, the results could be further extended for the analysis of the concentration profile and study of horizontal growth.
    關聯: The 14Th Nano & Micro-system Technology Conference, Paper A02_04, Kaohsiung, Taiwan (2010)
    显示于类别:[珠寶系] 會議論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    nano01.pdfExperimental matching method for the two-dimensional numerical simulation of micro-floating zone in laser heated pedestal18456KbAdobe PDF41157检视/开启


    在MUIR中所有的数据项都受到原著作权保护.

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈